Message-ID: <36703F1B.7937B068@uswest.net>
Date: Thu, 10 Dec 1998 14:37:31 -0700
From: "Richard J. Kocher" <rjkocher@uswest.net>
X-Mailer: Mozilla 4.07 [en] (Win98; I)
MIME-Version: 1.0
Newsgroups: rec.autos.simulators
Subject: Re: T2 settings for GP2, NFS-SE?
References: <74mb6n$1ep$1@knot.queensu.ca>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
NNTP-Posting-Host: 207.225.167.112
X-Trace: 10 Dec 1998 15:42:08 +0600, 207.225.167.112
Lines: 25
X-Report: Report abuse to abuse@uswest.net.
Path: news.jprc.com!dca1-feed2.news.digex.net!dca1-hub1.news.digex.net!digex!newsfeed.berkeley.edu!su-news-hub1.bbnplanet.com!su-news-feed4.bbnplanet.com!news.gtei.net!newsfeed1.uswest.net!news1.uswest.net!207.225.167.112
Xref: news.jprc.com rec.autos.simulators:63007

For NFS-SE, I also have problems with my T2.  If you have Windows, run the
game there.  If you don't, try running the jcu.exe program in the main
directory of the game.  I guess you could also do both (Windows and jcu).
Hope this helps

Steve Ferguson wrote:

> Hello all.  Sorry for the "old news" posting, but I finally dug my old T2
> wheel out of storage to hook to my notebook via a PCMCIA game card.  It
> hooks up and configures fine with GP2, ICR2 and NASCAR 1.  In fact, it is
> verrry nice with ICR2 and NASCAR.. whole new games, and rather
> spine- tingling.  Can someone recommend "good" parameters for the T2 with
> GP2 (max lock, reduce with speed, low sensitivity zone).
>
> Also, I can't get NFS-SE past the initial calibration screen.  I comes up
> with the gearshifter, and two yellow bars, which I assume indicates the
> two joysticks.  When I move the wheel, the shifter moves left to right.
> When I push the gas and brake, only one of the yellow bars moves.
> However, when I press the gear shift, or a button on the T2 to exit the
> calibration, it does nothing, so I cannot calibrate the wheel.  Any ideas?
> I am running this under DOS.
>
> regards
> Stephen

