Newsgroups: rec.autos.simulators
Path: news.jprc.com!dca1-feed2.news.digex.net!btnet-peer!btnet!dca1-hub1.news.digex.net!digex!cyclone.i1.net!uunet!in2.uu.net!wotan.compaq.com!twisto.eng.hou.compaq.com!news
From: "Trey Jones" <Trey.jones@compaq.com>
Subject: Need Diamond Monster II 12M help please
Message-ID: <F3D26w.yF@twisto.im.hou.compaq.com>
X-Mimeole: Produced By Microsoft MimeOLE V4.72.2106.4
Sender: news@twisto.im.hou.compaq.com (System Administrator)
Organization: Compaq Computer Corp.
Date: Wed, 2 Dec 1998 23:22:23 GMT
X-Newsreader: Microsoft Outlook Express 4.72.2106.4
Lines: 16
X-Nntp-Posting-Host: moab.wins.compaq.com
Xref: news.jprc.com rec.autos.simulators:61527

I have a BIG favor to ask from the list.  I am in the process of converting
my 8M Monster II to a 12M Monster II.  I need some kind person who owns a
Monster II 12M to look at the front side of thier card and tell me which
resistors are NOT installed.  There should be 5 or 10 on the front of the
card on the end away from the metal bracket which are empty pads without
resistors installed.  I believe that the resistors are strappping resistors
which tell the card How much memory is installed and other options.  I have
populated all memory pads but I think I need to change the config resistors
to make the card think it is a 12M card.

PS the 8 M printed circuit board has a part number silk screened (not the
sticker) on the back side of 22150105-005.  I am betting that the 12M uses
the same printed circuit board but populates all of the memory pads and
changes a couple of resistors


