Newsgroups: rec.autos.simulators
Path: news.jprc.com!dca1-feed2.news.digex.net!dca1-hub1.news.digex.net!digex!cyclone.news.idirect.com!island.idirect.com!news.maxwell.syr.edu!news.new-york.net!news2.new-york.net!not-for-mail
From: Doug Arnao <douga@carroll.com>
Subject: Re: GPL bump rubber question
Content-Type: text/plain; charset=us-ascii
X-Complaints-To: Email abuse@news2.new-york.net if this posting is inappropriate
Content-Transfer-Encoding: 7bit
NNTP-Posting-Host: rhea25.carroll.com
Organization: Vehicle Craft Inc.
Message-ID: <361AB9D0.EECCB23D@carroll.com>
References: <361A6478.A6D@cris.com>
X-Mailer: Mozilla 4.05 [en] (Win95; I)
Mime-Version: 1.0
X-Trace: news2.new-york.net 907720795 24785 (None) [204.141.200.28]
Date: Wed, 7 Oct 1998 00:46:08 GMT
Lines: 30
Xref: news.jprc.com rec.autos.simulators:47135



Trips wrote:

> I've been playing with setups a bit and I've run into a possible problem
> with the bump rubbers.
>
> I've downloaded setups from Achim Trenz, Doug Arnao, and Dave MAnsell,
> and all of them have the bump rubbers set at .5 inch.
>
> I'm unable to get the bump rubbers to go less than 1 inch on any setup I
> create...
>
> Were these setups (with .5 inch bump rubbers) created in a beta version?
> Is there any way to get the bump rubber setting below 1 inch in the
> release?

Yes,  this was a last minute change per the Beta teams request.....actually
I wanted it at 1.5"..........

--Doug

>
>
> Thanks in advance,
>
> Trips



