# Makefile.in generated by automake 1.11.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Makefile.am
# Automake file for Wireshark documentation
#
# $Id: Makefile.am 36205 2011-03-17 13:18:27Z morriss $
#
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.

# We include dependencies on ../config.h in order to
# capture when $(VERSION) changes.


pkgdatadir = $(datadir)/wireshark
pkgincludedir = $(includedir)/wireshark
pkglibdir = $(libdir)/wireshark
pkglibexecdir = $(libexecdir)/wireshark
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-linux-gnu
host_triplet = i686-pc-linux-gnu
target_triplet = i686-pc-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/aclocal-fallback/glib-2.0.m4 \
	$(top_srcdir)/aclocal-fallback/gtk-2.0.m4 \
	$(top_srcdir)/aclocal-fallback/gtk-3.0.m4 \
	$(top_srcdir)/aclocal-fallback/libgcrypt.m4 \
	$(top_srcdir)/aclocal-fallback/libsmi.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man4dir)" \
	"$(DESTDIR)$(pkgdatadir)"
man4dir = $(mandir)/man4
NROFF = nroff
MANS = $(man1_MANS) $(man4_MANS) $(man_MANS)
DATA = $(pkgdata_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run aclocal-1.11
ADNS_LIBS = 
AMTAR = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run tar
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run autoconf
AUTOHEADER = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run autoheader
AUTOMAKE = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run automake-1.11
AWK = gawk
CC = /usr/bin/gcc   
CCDEPMODE = depmode=gcc3
CC_FOR_BUILD = /usr/bin/gcc   
CFLAGS = -DINET6 -D_U_="__attribute__((unused))" -g -O2 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wcast-align -Wformat-security -I/usr/local/include -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12    
CORESERVICES_FRAMEWORKS = 
CPP = /usr/bin/gcc    -E
CPPFLAGS =  -I/usr/local/include   '-DPLUGIN_DIR="$(plugindir)"'
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2 -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12  
CYGPATH_W = echo
C_ARES_LIBS = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOXYGEN = 
DSYMUTIL = 
DUMPBIN = 
DUMPCAP_GROUP = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
ELINKS = 
ENABLE_STATIC = 
EXEEXT = 
FGREP = /bin/grep -F
FOP = 
GEOIP_LIBS = 
GETOPT_LO = 
GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GLIB_GENMARSHAL = glib-genmarshal
GLIB_LIBS = -pthread -Wl,--export-dynamic -lgthread-2.0 -lgmodule-2.0 -lrt -lglib-2.0  
GLIB_MKENUMS = glib-mkenums
GOBJECT_QUERY = gobject-query
GREP = /bin/grep
GTK_CFLAGS = -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12  
GTK_LIBS = -pthread -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgio-2.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lcairo -lpango-1.0 -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lglib-2.0  
HAVE_BLESS = no
HAVE_DOXYGEN = no
HAVE_DPKG_BUILDPACKAGE = no
HAVE_ELINKS = no
HAVE_FOP = no
HAVE_HDIUTIL = no
HAVE_HHC = no
HAVE_LYNX = no
HAVE_OSX_PACKAGING = no
HAVE_PKGMK = no
HAVE_PKGPROTO = no
HAVE_PKGTRANS = no
HAVE_RPM = yes
HAVE_SVR4_PACKAGING = no
HAVE_XCODEBUILD = no
HAVE_XMLLINT = yes
HAVE_XSLTPROC = yes
HHC = 
HTML_VIEWER = /usr/bin/xdg-open
INET_ATON_LO = 
INET_NTOP_LO = 
INET_PTON_LO = 
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
KRB5_CONFIG = /usr/kerberos/bin/krb5-config
KRB5_LIBS = -lkrb5 -lk5crypto -lcom_err 
LAUNCHSERVICES_FRAMEWORKS = 
LD = /usr/bin/ld
LDFLAGS =  -Wl,--as-needed -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib -L/usr/local/lib
LDFLAGS_SHAREDLIB = 
LEX = /usr/bin/flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBCAP_LIBS = 
LIBGCRYPT_CFLAGS = 
LIBGCRYPT_CONFIG = no
LIBGCRYPT_LIBS = 
LIBGNUTLS_CFLAGS = 
LIBGNUTLS_LIBS = 
LIBOBJS = 
LIBS = -lz 
LIBSMI_CFLAGS = 
LIBSMI_LDFLAGS = 
LIBSMI_VERSION = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ./ltmain.sh
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LUA_INCLUDES = 
LUA_LIBS = 
LYNX = 
MAKEINFO = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT = 
NSL_LIBS = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = wireshark
PACKAGE_BUGREPORT = 
PACKAGE_NAME = wireshark
PACKAGE_STRING = wireshark 1.5.2
PACKAGE_TARNAME = wireshark
PACKAGE_URL = 
PACKAGE_VERSION = 1.5.2
PATH_SEPARATOR = :
PCAP_CONFIG = /usr/bin/pcap-config
PCAP_LIBS = -lpcap
PCRE_LIBS = 
PERL = /usr/bin/perl
PKG_CONFIG = /usr/bin/pkg-config
PLUGIN_LIBS = 
POD2HTML = /usr/bin/pod2html
POD2MAN = /usr/bin/pod2man
PORTAUDIO_INCLUDES = 
PORTAUDIO_LIBS = 
PYTHON = /usr/bin/python
PY_CFLAGS = 
PY_LIBS = 
RANLIB = ranlib
SED = /bin/sed
SETCAP = /usr/sbin/setcap
SET_MAKE = 
SHELL = /bin/sh
SOCKET_LIBS = 
SSL_LIBS = 
STRERROR_LO = 
STRIP = strip
STRNCASECMP_LO = 
STRPTIME_C = 
STRPTIME_LO = 
VERSION = 1.5.2
XMLLINT = /usr/bin/xmllint
XSLTPROC = /usr/bin/xsltproc
YACC = bison -y
YACCDUMMY = /usr/bin/bison
YFLAGS = 
abs_builddir = /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/doc
abs_srcdir = /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/doc
abs_top_builddir = /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark
abs_top_srcdir = /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark
ac_ct_CC = /usr/bin/gcc   
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
ac_cv_wireshark_have_rpm = yes
ac_ws_python_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = i686-pc-linux-gnu
build_alias = 
build_cpu = i686
build_os = linux-gnu
build_vendor = pc
builddir = .
capinfos_bin = capinfos$(EXEEXT)
capinfos_man = capinfos.1
datadir = ${datarootdir}
datarootdir = ${prefix}/share
dftest_bin = dftest$(EXEEXT)
dftest_man = dftest.1
docdir = /usr/local/share/doc/wireshark
dumpcap_bin = dumpcap$(EXEEXT)
dumpcap_man = dumpcap.1
dvidir = ${docdir}
editcap_bin = editcap$(EXEEXT)
editcap_man = editcap.1
exec_prefix = ${prefix}
host = i686-pc-linux-gnu
host_alias = 
host_cpu = i686
host_os = linux-gnu
host_vendor = pc
htmldir = ${docdir}
idl2wrs_bin = idl2wrs
idl2wrs_man = idl2wrs.1
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /root/mountpoint-genprog/genprog-many-bugs/wireshark-bug-37112-37111/wireshark/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mergecap_bin = mergecap$(EXEEXT)
mergecap_man = mergecap.1
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
plugindir = ${libdir}/wireshark/plugins/${VERSION}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pythondir = 
randpkt_bin = randpkt$(EXEEXT)
randpkt_man = randpkt.1
rawshark_bin = rawshark$(EXEEXT)
rawshark_man = rawshark.1
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target = i686-pc-linux-gnu
target_alias = 
target_cpu = i686
target_os = linux-gnu
target_vendor = pc
text2pcap_bin = text2pcap$(EXEEXT)
text2pcap_man = text2pcap.1
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..
tshark_bin = tshark$(EXEEXT)
tshark_man = tshark.1
wireshark_SUBDIRS = codecs gtk
wireshark_bin = wireshark$(EXEEXT)
wireshark_man = wireshark.1
wiresharkfilter_man = wireshark-filter.4

#
# This is a hideous hack.
#
# Automake needs to know into which sections to install various man
# pages; if the names in "man_MANS" have suffixes, it can infer the
# sections from the name (e.g., "hello.1" goes in section 1), but if
# they don't have suffixes, it can't tell what sections to put them, and
# it just gives up and doesn't create any rules to install them (and it
# gives up silently, so you have no clue what's wrong).
#
# Therefore, we can't just set "man_MANS" to a list of variables to be
# filled in by the configure script, as those variables don't have man
# page section numbers.
#
# It turns out (although this is not documented anywhere I could find
# in the automake Info file) that if you define, instead, variables with
# names like "man{section}_MANS", automake will infer that the names in
# those variables are the names of man pages to be installed in section
# "{section}".
#
# So we define "man1_MANS" to contain all the section 1 man pages and
# man4_MANS for the (one) section 4 man page.
#
# *However*, if "man_MANS" isn't defined at all, automake concludes that
# there are no man pages, the fact that, say, "man1_MANS" is defined
# nonwithstanding!  (I suspect this is the result of a mistaken attempt
# to get people to fix their automake files not to use "MANS"; if "MANS"
# is defined, it prints a warning and sets the exit status, but doesn't
# exit, and then it just gives up if "man_MANS" isn't defined,
# presumably on the theory that the only reason it wouldn't be defined
# is because the automake file uses the obsolete "MANS" variable instead
# of the shiny new "man_MANS" variable.)
#
# So we also define "man_MANS", but don't define it as anything;
# automake will arrange that the Makefile define it as the union of all
# the "man{section}_MANS" variables.
#
man1_MANS = \
	wireshark.1	\
	tshark.1	\
	text2pcap.1	\
	mergecap.1	\
	capinfos.1	\
	editcap.1	\
	dumpcap.1	\
	idl2wrs.1	\
	rawshark.1	\
	dftest.1	\
	randpkt.1

man4_MANS = wireshark-filter.4
man_MANS = 
pkgdata_DATA = AUTHORS-SHORT $(top_srcdir)/docbook/ws.css wireshark.html \
	tshark.html wireshark-filter.html capinfos.html editcap.html \
	idl2wrs.html mergecap.html text2pcap.html dumpcap.html rawshark.html \
	dftest.html randpkt.html

CLEANFILES = \
	wireshark.pod \
	wireshark-filter.4 \
	wireshark-filter.html \
	wireshark.1	\
	wireshark.html	\
	capinfos.1	\
	capinfos.html	\
	dftest.1	\
	dftest.html	\
	dumpcap.1	\
	dumpcap.html	\
	editcap.1	\
	editcap.html	\
	idl2wrs.1	\
	idl2wrs.html	\
	mergecap.1	\
	mergecap.html	\
	randpkt.1	\
	randpkt.html	\
	rawshark.1	\
	rawshark.html	\
	text2pcap.1	\
	text2pcap.html	\
	tshark.1	\
	tshark.html

DISTCLEANFILES = \
	pod2htmi.tmp		\
	pod2htmd.tmp		\
	AUTHORS-SHORT		\
	../AUTHORS-SHORT	\
	AUTHORS-SHORT-FORMAT	\
	*~

MAINTAINERCLEANFILES = \
	Makefile.in

EXTRA_DIST = \
	Makefile.nmake	\
	README.binarytrees	\
	README.capture	\
	README.design	\
	README.developer	\
	README.display_filter	\
	README.heuristic	\
	README.idl2wrs	\
	README.malloc	\
	README.packaging	\
	README.plugins	\
	README.python \
	README.regression   \
	README.request_response_tracking	\
	README.stats_tree	\
	README.tapping	\
	README.xml-output	\
	doc.vcproj		\
	make-authors-format.pl	\
	make-authors-short.pl	\
	perlnoutf.pl		\
	capinfos.pod		\
	dfilter2pod.pl		\
	dftest.pod		\
	dumpcap.pod		\
	editcap.pod		\
	eproto2sgml		\
	idl2wrs.pod		\
	mergecap.pod		\
	randpkt.pod		\
	randpkt.txt		\
	rawshark.pod		\
	sgml.doc.template	\
	text2pcap.pod		\
	tshark.pod		\
	wireshark-filter.pod    \
	wireshark.pod.template

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
install-man4: $(man4_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man4dir)" || $(MKDIR_P) "$(DESTDIR)$(man4dir)"
	@list='$(man4_MANS)'; test -n "$(man4dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.4[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^4][0-9a-z]*$$,4,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man4dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man4dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man4dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man4dir)" || exit $$?; }; \
	done; }

uninstall-man4:
	@$(NORMAL_UNINSTALL)
	@list='$(man4_MANS)'; test -n "$(man4dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.4[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^4][0-9a-z]*$$,4,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man4dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man4dir)" && rm -f $$files; }
install-pkgdataDATA: $(pkgdata_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@list='$(MANS)'; if test -n "$$list"; then \
	  list=`for p in $$list; do \
	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
	  if test -n "$$list" && \
	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
	    exit 1; \
	  else :; fi; \
	else :; fi
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man4dir)" "$(DESTDIR)$(pkgdatadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-man install-pkgdataDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1 install-man4

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-man uninstall-pkgdataDATA

uninstall-man: uninstall-man1 uninstall-man4

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-man4 install-pdf install-pdf-am install-pkgdataDATA \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-man uninstall-man1 uninstall-man4 \
	uninstall-pkgdataDATA


#
# Build the short version of the authors file for the about dialog
#
AUTHORS-SHORT: $(top_srcdir)/AUTHORS $(srcdir)/make-authors-short.pl
	$(PERL) $(srcdir)/perlnoutf.pl $(srcdir)/make-authors-short.pl < $(top_srcdir)/AUTHORS > AUTHORS-SHORT

# Put a copy in the top-level directory so Help->About, when run from the
# build directory, can find it.
../AUTHORS-SHORT: AUTHORS-SHORT
	cp AUTHORS-SHORT ..

#
# Build the short version of the authors file with formatting codes for the
# man page
# (Depending on ../AUTHORS-SHORT is a bit of a hack to get the file copied
# down there.)
#
AUTHORS-SHORT-FORMAT: ../AUTHORS-SHORT $(srcdir)/make-authors-format.pl
	$(PERL) $(srcdir)/perlnoutf.pl $(srcdir)/make-authors-format.pl < AUTHORS-SHORT > AUTHORS-SHORT-FORMAT

wireshark.pod: $(srcdir)/wireshark.pod.template AUTHORS-SHORT-FORMAT
	cat $(srcdir)/wireshark.pod.template AUTHORS-SHORT-FORMAT > wireshark.pod

wireshark.1: wireshark.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	wireshark.pod  > wireshark.1

wireshark.html: wireshark.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)						\
	--title="The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css			\
	--noindex						\
	wireshark.pod > wireshark.html

tshark.1: tshark.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/tshark.pod > tshark.1

tshark.html: tshark.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)							\
	--title="tshark - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/tshark.pod > tshark.html

wireshark-filter.4: wireshark-filter.pod ../config.h
	$(POD2MAN)					\
	--section=4					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/wireshark-filter.pod > wireshark-filter.4

wireshark-filter.html: wireshark-filter.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)								\
	--title="wireshark-filter - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css					\
	--noindex								\
	$(srcdir)/wireshark-filter.pod > wireshark-filter.html

capinfos.1: capinfos.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/capinfos.pod > capinfos.1

capinfos.html: capinfos.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)							\
	--title="capinfos - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/capinfos.pod > capinfos.html

editcap.1: editcap.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/editcap.pod > editcap.1

editcap.html: editcap.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)							\
	--title="editcap - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/editcap.pod > editcap.html

idl2wrs.1: idl2wrs.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/idl2wrs.pod > idl2wrs.1

idl2wrs.html: idl2wrs.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)							\
	--title="idl2wrs - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/idl2wrs.pod > idl2wrs.html

mergecap.1: mergecap.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/mergecap.pod > mergecap.1

mergecap.html: mergecap.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)							\
	--title="mergecap - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/mergecap.pod > mergecap.html

text2pcap.1: text2pcap.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/text2pcap.pod > text2pcap.1

text2pcap.html: text2pcap.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)                     \
	--title="text2pcap - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/text2pcap.pod > text2pcap.html

dumpcap.1: dumpcap.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/dumpcap.pod > dumpcap.1

dumpcap.html: dumpcap.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)                     \
	--title="dumpcap - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/dumpcap.pod > dumpcap.html

rawshark.1: rawshark.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/rawshark.pod > rawshark.1

rawshark.html: rawshark.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)                     \
	--title="rawshark - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/rawshark.pod > rawshark.html

dftest.1: dftest.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/dftest.pod > dftest.1

dftest.html: dftest.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)                     \
	--title="dftest - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/dftest.pod > dftest.html

randpkt.1: randpkt.pod ../config.h
	$(POD2MAN)					\
	--center="The Wireshark Network Analyzer"	\
	--release=$(VERSION)				\
	$(srcdir)/randpkt.pod > randpkt.1

randpkt.html: randpkt.pod ../config.h $(top_srcdir)/docbook/ws.css
	$(POD2HTML)                     \
	--title="randpkt - The Wireshark Network Analyzer $(VERSION)"	\
	--css=$(top_srcdir)/docbook/ws.css				\
	--noindex							\
	$(srcdir)/randpkt.pod > randpkt.html

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
